Oregon 75LGX072G 20" 72 Link .375 Pitch .063 Gauge

Our Patented Cryo Temper process extends the life of these chainsaw chains by 300%. They stay sharp twice as long, So you can cut twice as much wood between sharpening's and get twice as many sharpening's.

The Cryogenic Tempering Process tempers the entire thickness of the metal, so even after re-sharpening, Our chains will out perform untreated blades.

Because our process does not change the hardness of the metal, you can still re-sharpen with a hand file. These Oregon Chainsaw Chains are made out of high carbon O-1 tool steel. Because O-1 has a carbon content of 0.9%, typical wear resistance is increased by 418% on average.

75LGX is the .063 gauge version of the popular 72LGX saw chain.

Round chisel cutters work well in both softwoods and hardwoods.

75LGX works best in clean cutting conditions, where there is limited contact with dirt and other abrasive materials.

Chain is .375 pitch, .063 (1.6mm) gauge. 75LGX fits saws using WoodlandPRO 33 series and Stihl 36 series chain.

75LGX chain sharpens with a 7/32" round file or 3/16" grinding wheel.

Recommended saw size: 50 to 100cc, bar length: 16 to 36-inch (41-91cm)

Patented chain steel-oregon ocs-01 steel is patented and provides greater durability, especially in cold cutting conditions Blued cutters provide superior corrosion resistance and improved strength "X" grind-Enhanced grind geometry significantly improves out-of-box sharpness with substantial speed improvement in boring and bias (undercut) modes

Warning: oregon 72, 73, and 75lgx super guard chains may be capable of kickback that could result in serious injury to the saw operator or bystanders